Gutters & metal work, built to fit.
Seamless gutters, metal fascia, panels, awnings, and finials fabricated to fit your home, not pulled off a shelf. We install across Coweta County and South Metro Atlanta.
A roof is only as good as the water management around it, which is why Griffintegrity Roof & Remod fabricates and installs gutters, metal fascia, panels, awnings, and finials for homeowners across Newnan, Sharpsburg, Peachtree City, and the rest of Coweta County and South Metro Atlanta. Seamless gutters are formed on site to fit your home's exact dimensions rather than pieced together from stock lengths, which cuts down on the leak points that come with seams. We work through a preferred metal fabricator for custom pieces, from fascia and panels to decorative finials, so the finished roofline matches the quality of the roof itself.
Are your gutters overflowing or pulling away from the house?
Overflow during rain usually means the gutters are clogged, sagging out of pitch, or simply undersized for the amount of water coming off the roof. Gutters pulling away from the fascia point to failing hangers or rotting wood behind them, which needs attention before the whole run comes down. Either problem sends water straight down the siding and into the foundation instead of away from the house, which is exactly what gutters exist to prevent. We inspect the whole run, not just the visible trouble spot, before recommending a fix.
Warning signs to watch for
Water overflowing during rain
Water spilling over the gutter edge instead of running through the downspout usually means a clog, wrong pitch, or a gutter system too small for the roof's water volume.
Gutters sagging or pulling away from the roofline
Sagging sections usually mean the hangers have failed or the fascia behind them has started to rot, both of which get worse the longer they sit.
Peeling paint or rot on the fascia board
Fascia damage is often the first visible sign that water has been running behind the gutter instead of through it for some time.
Erosion or pooling near the foundation
Mulch washouts or standing water right at the foundation line usually trace back to a gutter and downspout system that is not carrying water far enough away from the house.
What is causing the problem
Undersized or clogged gutters
A gutter system that was never sized for the roof's water volume, or one packed with debris, cannot keep up during a heavy rain no matter how well it was installed.
Failed hangers or rotted fascia
Once the wood behind the gutter starts to rot, the hangers holding the gutter in place lose their grip, and the whole run starts to sag or separate.
Old seamed gutters with failing joints
Traditional sectional gutters rely on seams that eventually leak, which is one of the main reasons seamless gutters hold up better over time.
Storm damage to gutters or downspouts
Dents and separated joints from wind or debris impact during a storm can compromise a gutter system that was otherwise in good shape.
What to expect during the visit
We start by walking the roofline and existing gutter system with you, measuring for a seamless fit and noting any fascia or hanger damage that needs addressing first. Seamless gutters are formed on site to your home's exact measurements, which we then install along with new hangers and downspouts positioned to carry water away from the foundation. For custom metal fascia, panels, awnings, or finials, we coordinate fabrication through our preferred metal shop to match your home's roofline and style. You get a clean, properly pitched system by the time we leave.
Related services you may need
Gutter work often comes up alongside a full roof replacement or after storm damage has affected the roofline, and siding damage near the gutter line is worth checking at the same time.
The cost of waiting
Gutters that overflow or leak send water directly down the siding and toward the foundation instead of away from it, and that pattern repeats with every rain until it is fixed. Fascia rot spreads along the roofline, siding stains and warps, and foundation soil can erode or shift over time. What starts as a minor overflow problem often ends up affecting parts of the house well beyond the gutter itself.
What are seamless gutters and why do they matter?
Seamless gutters are formed on site to match your home's exact measurements instead of assembled from stock lengths, which means fewer seams and fewer places for leaks to start.
Can you match custom metal work to my home's style?
Yes. We fabricate and install metal fascia, panels, awnings, and finials through our preferred metal fabricator, so custom pieces can be matched to your home's existing roofline and style.
What affects the cost of a gutter or metal fabrication project?
Cost depends on the length and complexity of the gutter run, how much fascia repair is needed underneath, and how much custom metal fabrication is involved. We give you a clear quote after walking the project with you.
If your gutters are overflowing or the fascia is looking rough anywhere in Coweta County or South Metro Atlanta, get a free quote before the next heavy rain. Call us to get started.
- Full tear-off and a new Owens Corning shingle or metal roof, installed by a crew that finishes most single-family homes in a single day.
- Leaks, broken or curled shingles, and holes diagnosed and fixed fast, so a small problem never turns into water damage inside.
- A certified insurance specialist on your side. We inspect, document, and meet your adjuster, and we never push a claim you do not need.
- Siding installation and repair that seals your home against the weather and lifts curb appeal, from a single wall to a full re-side.
- Kitchens, baths, garages, decks, screen rooms, and home additions handled start to finish by the same team you trust on your roof.